EC-07. Hand cream filling equipment – Synchronized speed control required – EC Slider
The speed can be set in increments of 0.01 mm/s, allowing the conveyor speed to follow the operation. Reduces conveyor downtime.
EC-08. Cosmetic conveyor sorting equipment – No degradation of speed due to aging
Since there is no degradation of speed due to aging, the allocation can be performed as set for a long period of time.
09. Pick and place medical bottles – IXA SCARA
The IXA cleanroom specification is ISO Class 3 compliant, making it ideal for operation in clean environments. Preliminary verification on a PC is possible by using simulation software.
10. Shampoo bottle filling equipment
The speed can be changed during movement, allowing the nozzle tip to move in accordance with the rate of rise of the liquid surface. By adjusting acceleration and deceleration, shampoo foaming can be prevented.
11. Pick and place Sloped Work – Vial bottles, oblique stocker
By combining Cartesian axes and wrist units, the cost can be reduced compared to Vertical articulated robots. In addition, the size of the safety fence can be reduced.
12. Barcode reading of specimen samples – Cleanroom Type Electric Actuators are adopted
The system is ISO class 2.5 equivalent, making it ideal for operation in clean environments. The wide lineup of products allows for a combination of axes with cleanroom specifications.
Application Example: EC – Hand cream dispensing device
Cosmetics & Chemicals System Overview : Improvement Overview : Device for filling containers on a conveyor belt with hand cream. An ELECYLINDER is employed to synchronize the dispensing device and the conveyor belt. Reduced labor cost of $10,560 per year thanks to...
EC – Deburring Device for Plastic Molding Products
ELECYLINDER® Applications Application A device to perform deburring of inside of lipstick caps. Description In the past, an air cylinder was used to load parts from the conveyor to the deburring machine and put them back on the conveyor after processing. However, it...
EC – Sorting Device for Medicine Packages
ELECYLINDER® Applications Application A device for sorting medicine packages by scanning printed data on the package surface. Description Previously, an air cylinder was used to transfer accepted products. To achieve a shorter cycle time, the air cylinder was operated...
EC – Cutting Device for Medical Equipment Parts
ELECYLINDER® Applications Application A driving device to cut bundles of medical equipment parts. Description The customer has adopted an ELECYLINDER® to set up cutting speed delicately and stabilize the cutting process. Usually, a guide is used together to prevent...
Easy Automation Concept Vol.10-2 Video #20
Example Video #20: System for soak-degreasing metal parts - Air cylinder vs IAI's ROBO Cylinder Shorter degreasing time achieved by flexible operation settings with the ROBO Cylinder This is a degreasing process for metal parts before they are plated. The...
Easy Automation Concept Vol.3-2 Video #06
Example Video #06: Sequential Feeder for Non-woven Fabric Punching Line - 10 Air cylinder vs 1 IAI's ROBO Cylinder The sequential feeder, a part of a press machine that punches out non-woven fabric for filters. The press machine performs punching operation at specific...
Test Tube Dispensing Application Example
Food Processing / Medical / Etc. Test Tube Dispensing Application Example Actuators: RCP2-SA7C RCP3-SA5C RCP3-SA3C Controller: PCON ROBO Cylinders have been adopted to dispense reagents in chemical inspection equipment. To prevent dripping the liquid, the...
Container Sealing Application Example
Food Processing / Medical / Etc. Container Sealing Application Example Actuator: RCP2-GRHM Controller: PCON This operation was previously performed using two air cylinders to heat seal the neck of the container. Since it used two independently driven cylinders, they...
Medical Needle Cutting Application
Medical Needle Cutting Application – an slider actuator is used to feed needles to a cutting wheel so they can be cut to length – IAI America Application Example
Liquid Product Packaging – Ink Filling, Examination, Lid Closing Application
Liquid Product Packaging – Ink Filling, Examination, Lid Closing Application – IAI ROBO Cylinder is used to squeeze the air out of the plastic bag so the ink system can then place the cap on.
Login Area & Phone Support
