0-1-Inspection & Test, 0-Aerospace, 0-Automotive, 0-Machinery, 0-Others, 1-Inspection, 2-Holding, 2-Pushing, 3-Mechanical Parts, 3-Metal Parts, Application Examples, ELECYLINDER Applications
ELECYLINDER® Applications Application A device for inspecting bearing torque Description With the air cylinder, the speed and acceleration / deceleration were unstable, and there was a defect where the bearing was damaged by the impact of the holding jig. The...
0-Machinery, 1-Applicator, 1-Dispensing, 2-Moving, 3-Mechanical Parts, Application Examples
Automotive & Aerospace Device for applying glue to machine parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4 MEC Controller Robo cylinders and MEC controllers have been adopted as devices that apply adhesives with mechanical dispensers to mechanical...
0-Machinery, 1-Press Fitting, 2-Pressing, 3-Mechanical Parts, 3-Ring, 3-Shaft Parts, Application Examples
Automotive & Aerospace Device for press-fitting the washer [ Robot/Electric Actuators ] [ Controllers ] RCP2-RA4C ROBONET (DeviceNet capable) RCP2 - RA4C was adopted in the process of press - fitting the washer to the machine parts. We selected ROBONET, which...
0-1-Conveyor, 0-Automotive, 0-Machinery, 1-Transferring, 2-Moving, 2-Pick and Place, 3-Mechanical Parts, Application Examples
Automotive & Aerospace Device for transporting crankshaft [ Robot/Electric Actuators ] [ Controllers ] ICSA2-G2JH-I-120AQ-80AQ-T1 XSEL 2-Axis controller The two axis orthogonal robot ICSA 2 was adopted as a device that picks up the workpiece (crankshaft) piled up...
0-Automotive, 0-Machinery, 1-Deburring, 2-Chucking, 2-Pressing, 2-Rotating, 3-Resin Parts, Application Examples
Automotive & Aerospace Deburring device for resin parts [ Robot/Electric Actuators ] [ Controllers ] ICSA2-YAH XSEL RCP2-GR PCON Previously, workers performed the deburring process of molded parts of resin, but it was automated since there were problems such as...
0-Machinery, 1-Drying Station, 2-Moving, 3-Mechanical Parts, 3-Metal Parts, Application Examples
Automotive & Aerospace Dryer for mechanical parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4C PCON It is a device to dry parts manufactured by machine tools. Previously, a worker dried the workpieces while holding the work and moving it back and forth...
0-Machinery, 1-Dispensing, 2-Moving, 3-Board, Plate, Panel, 3-Liquid, 3-Mechanical Parts, Application Examples, ELECYLINDER Applications
ELECYLINDER® Applications Application A system to dispense adhesive agent on wind-power generator parts. Description In the past, it was done manually, making uneven dispensing. The ELECYLINDER® performs even dispensing. In addition, because the starting and ending...
0-Appliances, 0-Automotive, 0-Home Electronics, 0-Machinery, 0-Medical & Life Science, 1-Degreasing, 2-Moving, 2-Shaking, 3-Liquid, 3-Metal Parts, Application Examples
Example Video #20: System for soak-degreasing metal parts - Air cylinder vs IAI's ROBO Cylinder Shorter degreasing time achieved by flexible operation settings with the ROBO Cylinder This is a degreasing process for metal parts before they are plated. The...
0-1-Inspection & Test, 0-Appliances, 0-Automotive, 0-Building Materials, 0-Machinery, 1-Inspection, 1-Rolling, 1-Transferring, 2-Grasping, 2-Measuring, 2-Pick and Place, 3-Mechanical Parts, 3-Metal Parts, 3-Rod, Application Example Videos, Application Examples, Easy Automation Concept, Easy Automation videos
Example Video #19: System for inspecting/transferring stud bolt material - Air cylinder vs IAI's ROBO Cylinder A simple system configuration to reduce the cycle time by 44%. Material, round bars, are checked for outer diameter before a process of rolling machine....
0-Automotive, 0-Machinery, 1-Processing Machine, 2-Open and Close, 3-Mechanical Parts, Application Examples, Videos
Easy Automation Improvement Example V.6-2 Machine Door Opening/Closing Mechanism This system creates tapped holes in aluminum die-cast boxes and finishes (mills) the holes. A vertical articulated robot is used to put in / take out parts to/from the processing machine....
0-Automotive, 0-Machinery, 0-Others, 1-Deburring, 2-Moving, 3-Mechanical Parts, 3-Metal Parts, Application Example Videos, Application Examples, Easy Automation Concept, Easy Automation videos
Example Video #07: Deburring System - Air cylinder vs IAI's ROBO Cylinder This system removes burrs around holes drilled in a pulley*1. Eight locations are deburred. The deburring brush attached to the motorized spindle*2 is used to remove the burrs along the edge of...
0-Automotive, 0-Machinery, 1-Welding, 2-Moving, 2-Positioning, 3-Frame Parts, Application Examples
* Exchange Rate: 1 (USD) = 100 (Japanese Yen) Automotive / Machine Tools Spot Welding Equipment Application Example Here you can create the content that will be used within the module. Robot: RCP4-SA7C, RCP2-SS8C Controller: PCON-CA Background This process carries a...
0-Machinery, 1-Processing Machine, 2-Loading Unloading, 3-Metal Parts, Application Examples
Machine Tools Machine Loader & Unloader Application Example Actuators: RCP4-SA6C/SA7CRCP2-GRMRCP2-RTCB Controller: PCON-CA In the process of machining aluminum parts inside the machining center, ROBO Cylinders have been employed in loading & unloading the work...
![NC Lathe Application]()
0-Automotive, 0-Machinery, 1-Processing Machine, 2-Pressing, 3-Rod, 3-Shaft Parts, Application Examples, Applications
IAI Electric Actuator Application Examples Application Examples with IAI Electric Actuators Automotive Numerically Controlled Lathe Actuators ROBO Cylinder RCP2W-RA10C Controller PCON-CF Note: Proper precautions should be taken such that the actuator doesn't receive...
![NC Lathe Application]()
0-Appliances, 0-Automotive, 0-Machinery, 1-Deburring, 2-Positioning, 2-Push-Pull, 3-Frame Parts, 3-Metal Parts, Application Examples, Applications
IAI Electric Actuator Application Examples Application Examples with IAI Electric Actuators Inspection - Examination - Etc. Positioning and Deburring Aluminum Actuators RCP2-RA4C / RCP2-RA10C Controller PCON / PCON-CF - Equipment is used to remove burrs from machined...
