Latest IAI News
RCON System Controller
The RCON system is a high-performance controller that feature modular connection units with excellent expansibility. Up to 16 axes can be connected.
read moreRCP6(S)-GRST Long Stroke Gripper
The RCP6-GRST long stroke gripper with high grip force is ideal for grasping large workpieces. High rigidity long stroke has max open/close stroke of 260mm.
read moreGRS Solenoid Gripper
– Small enough to fit in the palm of your hand. – Affordable as an air chuck. – Operated simply with ON/OFF signals.
read moreEC ELECYLINDER® – New Additions
Quickly setup ELECYLINDER in 5 minutes just by entering position, acceleration, and velocity data. Operate it with ON / OFF signals, like a solenoid valve.
read moreNews Link – IAI Products on the local news – KEYC News12, Mankato, MN
News Link: IAI Products on the local news - KEYC News12, Mankato, MN 09/20/2018 We were at a Robotic's open house last week with John Henry Foster in Mankato MN. The local news covered the robotic show! Click to visit the web-page on KEYC...
read moreEC – Transfer System for Boxing Cosmetic Bottle
Transfer System for Boxing Cosmetic Bottle Mechanism for pushing boxes onto the next conveyor connected perpendicularly to the current conveyor An air cylinder was used to transfer packages containing cosmetic bottles between conveyors (connect-ed perpendicularly)....
read moreEC – Engine Block Part Inspection Process
Engine Block Part Inspection Process Mechanism for moving a sensor up and down to measure heights of engine block parts In this process, heights of engine block parts on a conveyor are measured using a height measuring sensor attached to the tip of a rod, to determine...
read moreEC – Laser Marking System
Laser Marking System Inputting work parts to a laser marking system The previous system based on air cylinders presented problems such as diculty ne-tuning the work transfer speed and position. The new ELECYLINDER® system lets us set the product transfer position, A...
read moreEC – Deburring Device for Plastic Molding Products
Deburring Device for Plastic Molding Products A device to perform deburring of inside of lipstick caps. In the past, an air cylinder was used to load parts from the conveyor to the deburring machine and put them back on the conveyor after processing. However, it was...
read moreEC – Mounting & Dismounting Device of Returnable Box Lids
Mounting & Dismounting Device of Returnable Box Lids A device to mount and dismount the lids of returnable boxes in which finished parts are stored. In the past, an air cylinder was used to "remove and put a lid" from/on the returnable box. However, sometimes the lids...
read moreEC – Assembling Device for Electronic Parts
Assembling Device for Electronic Parts A device to put a cap in a sensor unit assembling process. The ELECYLINDER® uses its push-motion function to put a cap. Compared with an air cylinder, the ELECYLINDER® provides faster approaching speed and a constant pushing...
read moreEC – Device for Auto Parts External View
Device for Auto Parts External View A device to measure thickness by using laser displacement meter. A belt-like laser beam is radiated from a pair of laser measurement devices that are located top and bottom of an automobile part to measure the inner & outer...
read more