In addition to speed, acceleration and deceleration can be set respectively, enabling shock-less opening and closing while increasing speed.
Positions can be set in increments of 0.01mm, and feedback control of 1,000 times per second ensures repeatable and accurate engraving.
Radial cylinder has a built-in guide, so it can support radial loads without an external guide. ELECYLINDER Radial Cylinder Model, RR6 and RR7 are adopted.
The built-in controller and 24V power supply make it ideal for installation in AGVs. ELECYLINDER Slider Cylinder, S7 is adopted for shooters and inverting.
Sliding bushing construction is resistant to radial impact loads, making it ideal for stopper applications. The 24V power supply allows it to be used in any location.
High thrust type with maximum payload Horizontal 400kg, Vertical 80kg. Vertical mounting is possible even with long strokes, making it ideal for transfer lift applications. (Lifter applications)
The speed can be set in increments of 0.01 mm/s, allowing the conveyor speed to follow the operation. Reduces conveyor downtime.
Since there is no degradation of speed due to aging, the allocation can be performed as set for a long period of time.
The speed feedback of 20,000 times per second ensures that the moving speed is stable and evenly syrupy.
In addition to speed, acceleration and deceleration can be set respectively, thus preventing milk cartons from being knocked over or rolled in.
International Robot Exhibition in Tokyo, Japan – 2019 – thirteen videos show a variety of new products and application example demos
Driven by 24V power supply, no wiring work is required in the kitchen. The built-in controller helps save space.
Speed feedback of 20,000 times per second ensures stable speed and eliminates misclassification.
Since speed feedback is performed 20,000 times per second, the same timing can be used for each pushing out.
Smooth start/stop by adjusting acceleration and deceleration allows cakes to be transferred to the conveyor without collapsing.
Compact slender type with built-in controller and shortened overall length. Wireless teaching is possible by using the teaching tool TB-03 or Wireless Teaching Controller.
Rotary type also has adjustable acceleration and deceleration, allowing the speed to be increased while minimizing the impact of reversal.
Clean room specifications correspond to ISO Class 2.5 or 3. Ideal for transport in clean environments.
Clamping force, standby position, and clamping start position can be easily set numerically. Wireless teaching is possible by using the teaching tool TB-03 or Wireless Teaching Controller.
A palm-sized electric actuators are adopted. Up to max. 16 axes can be connected by using the REC controller.
Since S6□W is IP54 or equivalent and RR6□W is IP67 rated, they can be used in machining processes where dust is generated.
The inspection camera is brought to a smooth standstill by adjusting acceleration and deceleration. This can significantly reduce standby time due to camera vibration.
Pulse Presses can handle loads in the tensile direction and have no limit on tensile time. High precision judgments are possible at a low cost.
IXA, very high-speed SCARA robot in the industry, also supports push-motion operation. When fitting part A to part B, the position error can be compensated (compliance control).