EC – Press-fitting Device for Collars to Automobile Shaft Parts
ELECYLINDER® Applications Application A device to press-fit collars to automobile shaft parts. Description This is a semi-automated device to press-fit collars on to automobile shaft parts. Previously an air cylinder was used for driving the table. Compressed air was...
EC – Molding Process for Electric Appliance Parts
ELECYLINDER® Applications Application A device to press copper shafts of electric appliance parts onto a die for bending. Description In the past, an air cylinder was used for the bending process. After changing to an ELECYLINDER®, a slow operation and stable pressing...
Easy Automation Concept Vol.9-2 Videos #18
Example Video #18: Gear Shaft Press-fitting System - Air cylinder vs IAI's ROBO Cylinder Achieving 0% defect rate by shortening the cycle time and changeover time through optimal settings. This is a process for assembling gear parts with shafts for toys. A metal shaft...
Easy Automation Application Improvement Vol 8-2 – IAI News
November 10, 2017 Once or twice a month, we like to share IAI Actuator News with the automation community. Here is a new Easy Automation Application Improvement video Vol.8-2. Easy Automation Improvement Example Vol.8-2 Transfer System for Shaft Parts between...
NC Lathe Solution – Replacing A Hydraulic Cylinder with ROBO Cylinder
NC Lathe Solution – Replacing A Hydraulic Cylinder with IAI ROBO Cylinder – The setup is automated and thus makes the adjustment of the pushing force to the work piece easier.
Login Area & Phone Support
