Inspection & Test
Application Example: Brake Pad Quality Inspection Device
Brake Pad Quality Inspection DeviceBy motorizing the pressing of the brake bad, it was possible to Drastically reduce the time for changing the setup. [ Robot/Electric Actuators ] [ Controllers ] RCP5-RA4C - [Device outline] It is a device that performs the quality...
EC – Engine Block Part Inspection Process
Mechanism for moving a sensor up and down to measure heights of engine block parts In this process, heights of engine block parts on a conveyor are measured using a height measuring sensor attached to the tip of a rod, to determine whether the parts are good or...
EC – Device for Auto Parts External View
A device to measure thickness by using laser displacement meter. A belt-like laser beam is radiated from a pair of laser measurement devices that are located top and bottom of an automobile part to measure the inner & outer diameters. In this application, a...
EC – Device for Removing Defective Electronic Parts
A device to remove defective electronic parts from the conveyor The movement of the ELECYLINDER® after the sensor's detection of a defective part and a forward-ON signal is faster than that of an air cylinder, enabling the conveyor to increase the speed. EC-S6H ...
EC – Inspection Device for Automobile Safety Sensors
An inspection device to check the normal condition of automobile safety sensors after a shielding plate is closed. The employment of an ELECYLINDER® enables A (acceleration), V (velocity) and D (deceleration) to be adjusted individually, providing stable operations....
EC – Inspection Device for Glass Substrates
A device to perform a sampling inspection of glass substrates. This device performs a sampling inspection for glass substrates. The ELECYLINDER® transfers the glass substrate, while the cameras perform an inspection from the top and bottom simultaneously. The customer...
EC – Sorting Device for Instant Soup Packages
A device to inspect instant soup packages (visual examination), and sort them into two locations. In the past, air cylinders were used at the sorting gates to move the gates vertically. Quality products were sometimes flicked off the conveyor due to a shock at the...
EC – Sorting Device for Cosmetics on the Conveyor
A device for swaying a conveyor to sort cosmetic products into two lines for inspection machines. Two inspection machines are installed to enhance the inspection capacity. An ELECYLINDER® is used to sway a conveyor to divide the cosmetic products into two lines for...
EC – Sorting Device for Medicine Packages
A device for sorting medicine packages by scanning printed data on the package surface. Previously, an air cylinder was used to transfer accepted products. To achieve a shorter cycle time, the air cylinder was operated at a high speed, but gave a big shock at the time...
Easy Automation Concept Vol.10 Videos
Example Video #19: System for inspecting/transferring stud bolt material - Air cylinder vs IAI's ROBO Cylinder A simple system configuration to reduce the cycle time by 44%. Material, round bars, are checked for outer diameter before a process of rolling machine....
Easy Automation Improvement Example Vol 8-1 – IAI News
Easy Automation Improvement Example Vol 8-1 – IAI News
Reduced Costs for Chocolate Quality Inspection
Industry: Food Process: Inspection How We Reduced Costs for the Quality Inspection Process [Problems] · An air cylinder was used to move the camera for quality inspection. · Pressure adjustment to set the specified speed was difficult, and the speed was unstable even...