Cycle Time Calculation Software
Download these cycle time calculators. The cycle time of a single axis robot can be calculated from velocity, acceleration, deceleration, distance, and load weight.
TB-02 / TB-03 Firmware Update File
TB-02 / TB-03 Firmware Update File Update procedure Download the update file (ZIP file). Unzip the downloaded update file (ZIP file). Put the unzipped file "TB02_270.pct" directly under the root folder of the SD card and update. [Update file] Common files for TB-02...
IAI USB Driver
IAI USB Driver Download Please right click on the link and 'Save Target As'. Note: The IAI PC Software kit is a purchased item. Please contact your distributor for more information. Supports: Windows 2000 Windows XP Windows Vista (32bit and 64bit) Windows 7 (32bit and...
SEL Program Generator Software Download
DescriptionDownload The free SEL program generator is for use with the latest TTA Tabletop Robot. September 13, 2017 Update Click on the "Download" tab above to see the download link and overview of the new Screw-tightening, the new Soldering, and the new Simulator...
Add-On Instructions AOI for IAI Controllers
Free Add-on Instructions (AOI) and User Defined Data Types (UDT) are available for IAI controllers ACON, PCON, SCON and MSEP-C, operating in Full-Direct communication mode only. * Login required to download. They are saved as exported .L5X files from RSLogix 5000...
Field Network Configuration Files
Field Network Configuration Files List – The files are available to download. Please read the Software License Agreement PDF.
LC-Ladder Programming Software for MSEP-LC
- Simple operation commands for actuators - - Easy to operate, easy-to-read screen - - Software Covers Ladder Program Data Editing to Debugging - For Full Specs, Download the LC-Ladder Programming Software Catalog Download the LC-Ladder Software (Login...
LC-LADDER – Ladder Logic Support Software
Our free ladder logic support software will be available soon. *Please contact us about the status.
DD Selection Software
To calculate operating conditions, use the DD motor selection software. DD Motor Product Page Move to the Download Page
MEC PC Software Download
The MEC PC Software and Manual are available to download for free. Please read about the easy MEC 3-position Controllers if you are not yet familiar with them. Supported Operating Systems Windows 2000 (Service Pack 4 or later) Windows XP (32 bit / Service Pack 2 or...
DXF Import Tool Tutorial Video
The DXF import feature is a function of the IAI X-SEL software. The X-SEL software is compatible with XSEL, ASEL, PSEL, and SSEL controllers. The X-SEL software version 7.09 has the DXF import feature. Please watch the tutorial video to learn more. DXF - Data/Drawing...
ROBO Cylinder PC Software v7 with ASEP/PSEP/DSEP
The new ROBO Cylinder PC Software version 7 is now available. Please view the video tutorial above. There are no changes in the functionality of the software for the following controllers: PCON, ACON, SCON, ERC2 The changes for the new ROBO Cylinder PC Software...
Connecting IAI Products to Other Software
Connecting IAI products to machinery of other makes - Information concerning communications 1) ROBONET Modbus communication function block / Omron PLC (CS1/CJ1 Series) When connecting ROBONET controllers to an Omron PLC (CS1/CJ1 Series) you will need to download a...
IAI Software Version History
MEC PC Software Version History Download is available at the MEC PC Software page. Version Revision Date Compatible Models (○ : Supported) Revision Notes AMEC PMEC ERC3 (MEC mode) V2.01.01.00 Sept 2014 ○ ○ ○ Latest version.Maintenance information configuration...
ROBONET Modbus Communication
Connecting IAI products to machinery of other makes - Information concerning communications 1) ROBONET Modbus communication function block / Omron PLC (CS1/CJ1 Series) When connecting ROBONET controllers to an Omron PLC (CS1/CJ1 Series) you will need to download a...
Robo Cylinder PC Interface Software
Economical and easy to use, the Robo Cylinder® is specifically designed to accomplish the simple tasks usually assigned to air cylinder units, but with greater flexibility, control, and efficiency. The Robo Cylinder PC Interface Software provides a simple,...
Tutorials for Motion Control Software
The topics listed are those which are currently covered by the Tutorials section. If you have questions regarding any of these topics or those not listed, please contact us with your suggestion. SelWin Software (Sel E/G, DS, Sel A/B controllers) COM Port Setup...
Entering Controller Programs
The points, programs and parameters for each controller are stored in the memory of the controller itself. The information stored in the controller can be archived on any storage device by "saving" the item accordingly. Programs can be entered via software (preferred...
Upload / Download Points, Programs and Parameters to Controllers
Upload / Download Files The points, programs and parameters for each controller are stored in the memory of the controller itself. The information stored in the controller can be archived on any storage device by "saving" the item accordingly. In offline mode, one...
Communications Port Setup
Below are the communication port (COM port) settings for communicating with the DS, SuperSEL and SCARA: Baud Rate (Bits per second): 9600 Data Bits: 8 Parity: None Stop Bits: One Flow Control: None The Baud Rate setting for the Robo Cylinder can be set as high as...
Introduction to X-SEL PC Software Tutorial
Here is a 15 minute "Introduction to the XSEL PC Software" video tutorial. The XSEL PC Software is used with IAI's fully programmable controller line. These controllers include the X-SEL, ASEL, PSEL, and SSEL as well as many older SEL controllers. The XSEL PC software...
Running Programs
Through the software, the user can start programs and monitor their progress as code is being executed. This can also be done through the Teach Pendant, but with limited viewing area due to the small LCD readout on the Teach Pendant. Since both the Teach Pendant and...
Teaching Points
All taught positions are based upon a reference point, or "0.00 mm" location. If your actuator / controller combination features absolute encoders, homing is not necessary before teaching points. Incremental encoders will require homing before teaching points. In...
Login Area & Phone Support
