Automotive & Aerospace
Application Example: Device For Removal Of Foreign Substance By Air Blow
Device For Removal Of Foreign Substance By Air Blow [ Robot/Electric Actuators ] [ Controllers ] ISA-MXM (2-Axis) XSEL 4-Axis Controller RS (2-Axis) Single-axis robot ISA and rotary type RS for removing foreign substance adhering to automotive parts by air blow. By...
Application Example: Tool For Welding Auto Parts
Tool For Welding Auto Parts [ Robot/Electric Actuators ] [ Controllers ] ROBO Cylinder® - Positioning device for welding tanks with vertical articulated robots.
EC – Engine Block Part Inspection Process
Mechanism for moving a sensor up and down to measure heights of engine block parts In this process, heights of engine block parts on a conveyor are measured using a height measuring sensor attached to the tip of a rod, to determine whether the parts are good or...
EC – Laser Marking System
Inputting work parts to a laser marking system The previous system based on air cylinders presented problems such as diculty ne-tuning the work transfer speed and position. The new ELECYLINDER® system lets us set the product transfer position, A (acceleration), V...
EC – Device for Auto Parts External View
A device to measure thickness by using laser displacement meter. A belt-like laser beam is radiated from a pair of laser measurement devices that are located top and bottom of an automobile part to measure the inner & outer diameters. In this application, a...
EC – Press-fitting Device for Collars to Automobile Shaft Parts
A device to press-fit collars to automobile shaft parts. This is a semi-automated device to press-fit collars on to automobile shaft parts. Previously an air cylinder was used for driving the table. Compressed air was supplied only for the one-axis air cylinder alone....
EC – Cutting Device for Automobile Air Conditioning Parts
A device for cutting automobile air conditioning parts that are blow-molded. Previously, one air cylinder with a cutter was used to cut the parts. In order to increase production, it was operated at a high speed, thus producing cutting defects. Recently ELECYLINDER®...
EC – Inspection Device for Automobile Safety Sensors
An inspection device to check the normal condition of automobile safety sensors after a shielding plate is closed. The employment of an ELECYLINDER® enables A (acceleration), V (velocity) and D (deceleration) to be adjusted individually, providing stable operations....
EC – Welding Device for Auto Parts
A mechanism in a welding device for steel pipes to move the welding torch at a constant speed. In the past, this work was done manually, causing uneven quality. By using an ELECYLINDER®, the moving speed became constant, providing stable quality. In addition, since...
Easy Automation Concept Vol.10-2 Video #20
Example Video #20: System for soak-degreasing metal parts - Air cylinder vs IAI's ROBO Cylinder Shorter degreasing time achieved by flexible operation settings with the ROBO Cylinder This is a degreasing process for metal parts before they are plated. The...
Easy Automation Concept Vol.10 Videos
Example Video #19: System for inspecting/transferring stud bolt material - Air cylinder vs IAI's ROBO Cylinder A simple system configuration to reduce the cycle time by 44%. Material, round bars, are checked for outer diameter before a process of rolling machine....
Video: Nut Runner Application – Cartesian 5-axis + Single-axis – ISB, NS
Video: Nut Runner Application – Cartesian 5-axis + Single-axis – ISB, NS