Automotive & Aerospace
Easy Automation Application Improvement Vol 8-2 – IAI News
November 10, 2017 Once or twice a month, we like to share IAI Actuator News with the automation community. Here is a new Easy Automation Application Improvement video Vol.8-2. Easy Automation Improvement Example Vol.8-2 Transfer System for Shaft Parts between...
Easy Automation Improvement Example Vol 8-1 – IAI News
Easy Automation Improvement Example Vol 8-1 – IAI News
Easy Automation Improvement Example Vol 7-2 – IAI News
IAI-News – Easy Automation Improvement Example Vol 7-2
Easy Automation Improvement Example Vol 6-2
Machine Door Opening/Closing Mechanism – Easy Automation Improvement Example Vol 6-2
Easy Automation Concept Vol.4 Videos
Example Video #07: Deburring System - Air cylinder vs IAI's ROBO Cylinder This system removes burrs around holes drilled in a pulley*1. Eight locations are deburred. The deburring brush attached to the motorized spindle*2 is used to remove the burrs along the edge of...
Equipment for Marking Automobile Parts
Industry: Automotive / Machine Tools Process: Marking Parts are measured and checked by product type using a camera before the marking process. This data is sent to the XSEL controller using serial communication. The XSEL controller corrects the character size and...
Easy Automation Concept Vol.3-2 Video #06
Example Video #06: Sequential Feeder for Non-woven Fabric Punching Line - 10 Air cylinder vs 1 IAI's ROBO Cylinder The sequential feeder, a part of a press machine that punches out non-woven fabric for filters. The press machine performs punching operation at specific...
Deburring/Inspection Composite Equipment
Industry: Automobile / Mechanical parts Process: Inspection, Deburring Actuators: ISCA4 | Controller: XSEL The multi-slider type orthogonal robot of the NS series has been adopted as equipment to remove burrs from machine parts. One of the two Y-axes is used to deburr...
Easy Automation Concept Vol.1-2 Video #02
Example Video #02: Equipment for polishing iron pipe interiors - Air Cylinder vs IAI's ROBO Cylinder (Japanese version) Equipment for polishing iron pipe interiors This is equipment for polishing the interiors of iron pipes with a brush. Point 1: Defective rate...
Spot Welding Equipment Application Example
* Exchange Rate: 1 (USD) = 100 (Japanese Yen) Automotive / Machine Tools Spot Welding Equipment Application Example Here you can create the content that will be used within the module. Robot: RCP4-SA7C, RCP2-SS8C Controller: PCON-CA Background This process carries a...
Heat Exchanger Hole Size Confirmation Application Example
Inspection / Examination / Etc. Heat Exchanger Hole Size Confirmation Application Example Robot: TT-A3-4040 Controller: Built-in SEL controller The process of checking the sizes of the holes in a heat exchanger is a successful example of reducing labor costs by...
Engine Parts Transfer Application Example
Automotive Engine Parts Transfer Application Example Actuators: Controllers: RCS3-SA8C, RCP2-SA5C, RCP2-GRM SCON, PCON The reduction in cycle time in the process of transferring automotive engine parts is a successful example of reducing labor costs and stoppages. In...