West 800-736-1712 | Central 800-944-0333 | East 888-354-9470

Example Video #07: Deburring System - Air cylinder vs IAI's ROBO Cylinder

This system removes burrs around holes drilled in a pulley*1.
Eight locations are deburred.
The deburring brush attached to the motorized spindle*2 is used to remove the burrs along the edge of holes.
*1 Pulley: A gear that transmits motive power through a belt, etc., passed around it.
*2 Motorized spindle: A unit that uses a motor to turn and has chucks at its tip to hold a tool in place.

Point 1: Eliminating the need to change the tool stopping position and achieving a longer life.
Point 2: Significantly shorter cycle time
Point 3: 6 Air Cylinders = 0 ROBO Cylinder

Electric actuator perform better than... application example video
for Easy Automation Concept v04 Video 0401

 


 
Example Video #08: Glass Board Work Piece Transfer System - Air cylinder vs IAI's ROBO Cylinder

Glass boards are placed on a pallet in this process. 16 work pieces are placed in lines on one pallet.

The deburring brush attached to the motorized spindle*2 is used to remove the burrs along the edge of holes.

Point 1: Reducing the travel time with arch motion.
Point 2: Shorter changeover time
Point 3: 13 Air Cylinders = 0 ROBO Cylinder

Electric actuator perform better than... application example video
for Easy Automation Concept v04 Video 0402

Shares
Share This