Automotive & Aerospace
Application Example: Deburring device for resin parts
Deburring device for resin parts [ Robot/Electric Actuators ] [ Controllers ] ICSA2-YAH XSEL RCP2-GR PCON Previously, workers performed the deburring process of molded parts of resin, but it was automated since there were problems such as taking too much workload by...
Application Example: Loading/unloading loader for processing machines
Loading/unloading loader for processing machinesThe production efficiency is improved by 1.16 times Compared to the equipments in the past by having no short-time breakdown and shortening the cycle time by 1 second. [ Robot/Electric Actuators ] [ Controllers ]...
Application Example: Brake Pad Quality Inspection Device
Brake Pad Quality Inspection DeviceBy motorizing the pressing of the brake bad, it was possible to Drastically reduce the time for changing the setup. [ Robot/Electric Actuators ] [ Controllers ] RCP5-RA4C - [Device outline] It is a device that performs the quality...
Application Example: Device For Removal Of Foreign Substance By Air Blow
Device For Removal Of Foreign Substance By Air Blow [ Robot/Electric Actuators ] [ Controllers ] ISA-MXM (2-Axis) XSEL 4-Axis Controller RS (2-Axis) Single-axis robot ISA and rotary type RS for removing foreign substance adhering to automotive parts by air blow. By...
Application Example: Tool For Welding Auto Parts
Tool For Welding Auto Parts [ Robot/Electric Actuators ] [ Controllers ] ROBO Cylinder® - Positioning device for welding tanks with vertical articulated robots.
EC – Engine Block Part Inspection Process
Mechanism for moving a sensor up and down to measure heights of engine block parts In this process, heights of engine block parts on a conveyor are measured using a height measuring sensor attached to the tip of a rod, to determine whether the parts are good or...
EC – Laser Marking System
Inputting work parts to a laser marking system The previous system based on air cylinders presented problems such as diculty ne-tuning the work transfer speed and position. The new ELECYLINDER® system lets us set the product transfer position, A (acceleration), V...
EC – Device for Auto Parts External View
A device to measure thickness by using laser displacement meter. A belt-like laser beam is radiated from a pair of laser measurement devices that are located top and bottom of an automobile part to measure the inner & outer diameters. In this application, a...
EC – Press-fitting Device for Collars to Automobile Shaft Parts
A device to press-fit collars to automobile shaft parts. This is a semi-automated device to press-fit collars on to automobile shaft parts. Previously an air cylinder was used for driving the table. Compressed air was supplied only for the one-axis air cylinder alone....
EC – Cutting Device for Automobile Air Conditioning Parts
A device for cutting automobile air conditioning parts that are blow-molded. Previously, one air cylinder with a cutter was used to cut the parts. In order to increase production, it was operated at a high speed, thus producing cutting defects. Recently ELECYLINDER®...
EC – Inspection Device for Automobile Safety Sensors
An inspection device to check the normal condition of automobile safety sensors after a shielding plate is closed. The employment of an ELECYLINDER® enables A (acceleration), V (velocity) and D (deceleration) to be adjusted individually, providing stable operations....
EC – Welding Device for Auto Parts
A mechanism in a welding device for steel pipes to move the welding torch at a constant speed. In the past, this work was done manually, causing uneven quality. By using an ELECYLINDER®, the moving speed became constant, providing stable quality. In addition, since...