Latest IAI News
GRS Solenoid Gripper
– Small enough to fit in the palm of your hand. – Affordable as an air chuck. – Operated simply with ON/OFF signals.
EC – Transfer Device for Breads
A device for transferring breads on the tray transfer conveyor.When breads are fed out to the transfer conveyor before filling the tray, the transfer timing has to be adjusted by using a stopper. The ELECYLINDER® can easily adjust the starting/stopping positions and...
EC – Pallet Transfer Device
A transferring device for pallets on which automobile engine components are placed.This device transfers and pushes out the pallet on which an automobile engine component is placed. The 1st-axis inserts the hooking jig in the pallet and the 2nd-axis pushes it out. In...
EC – Transfer Device for Electronic Parts
A visual re-inspection process for rejected parts after a vision-camera inspection.Previously, this process was done manually all by hand (stretching hands to take the part, performing a visual inspection and returning the part). Depending on the workers' physical...
EC – Transfer Device of Ashtrays
A device for moving ashtrays horizontally and transferring them to the next process.This device transfers workpieces (ashtrays) to the next process. A motorized ELECYLINDER® was adopted because it was not possible to install a compressor at the site. One of the...
EC – Inspection Device of Bearing Torque
A device for inspecting bearing torqueWith the air cylinder, the speed and acceleration / deceleration were unstable, and there was a defect where the bearing was damaged by the impact of the holding jig. The ELECYLINDER® provides smooth deceleration, exerts no impact...
EC – Transfer Device for Stacked Frozen Food Packs
A device for stacking and transferring frozen food packs to the conveyor of the next process.This device transfers frozen gyoza dumplings from the wrapping process to the next process of packing into cardboard boxes. Packs are dropped from the conveyor by free fall,...
EC – Assembling Device of Automobile Interior Parts
A process to assemble parts on a resin-made frame.The "push function" of the ELECYLINDER® has enabled air-less and sensor-less operations. As the push motion is applied on an assembled part, the ELECYLINDER® detects the torque and outputs a "push motion complete"...
EC – Feeding Device of Paper Carton Materials
A device for feeding paper carton materials to the next process.The workpieces (before formed into paper liquid packs) stacked by the ELECYLINDER® are lifted up to the predetermined position. The sensor detects the top of the stacked workpieces and stops the lifting....
EC – Gate Cutting Device for Resin-Molded Parts
A device for operating the cutter of a gate cutting machine for resin-molded parts.Compared with an air cylinder, the ELECYLINDER® enables easier fine adjustments of the cutter position. The cutter's tilting movement by the Z-axis is smoother, thus providing a sharp...
EC – Deburring Device for Resin-Molded Products
A device for changing the position of a deburring heater.The heater location can be changed according to the type of the resin-molded product. When an air cylinder was used, the speed was limited to 300 mm/s in order to avoid failures of the heater due to impact at...
EC – Panel Positioning Device
A device for adjusting the transfer position of panels which are flowing on the conveyor.The worker pushes the panel flowing on the conveyor against the stopper for positioning. Drilling is carried out in the next process. The stopper is used to change the stopping...