ELECYLINDER® – Applications & Solutions
Application Example: EC – Device for extruding cheese
Device for extruding cheese and cutting into string-like thin shapes. Replacing an air cylinder with an ELECYLINDER for extruding cheese.
Application Example: EC – Device for putting syrup on doughnuts
Device for putting syrup on doughnuts on a conveyor belt. Replacing an air cylinder with an ELECYLINDER ® to move and dispense syrup.
Application Example: EC – Hand cream dispensing device
System Overview : Improvement Overview : Device for filling containers on a conveyor belt with hand cream.An ELECYLINDER is employed to synchronize the dispensing device and the conveyor belt.Reduced labor cost of $10,560 per year thanks to shorter cycle...
Application Example: EC – Device for transferring short cakes
System Overview : Improvement Overview : Device for transferring packaged short cakes to the next process conveyor belt.Replacing an air cylinder with an ELECYLINDER to transfer packaged short cakes.Reduced labor cost of $7,800 per year thanks to the shortened...
Application Example: EC – Printing device for cardboard boxes
Device for printing lot numbers on cardboard boxes for shipment. Replacing an air cylinder with an ELECYLINDER ®, IAI’s New Electric Actuator
EC – Transfer Device for Breads
A device for transferring breads on the tray transfer conveyor.When breads are fed out to the transfer conveyor before filling the tray, the transfer timing has to be adjusted by using a stopper. The ELECYLINDER® can easily adjust the starting/stopping positions and...
EC – Pallet Transfer Device
A transferring device for pallets on which automobile engine components are placed.This device transfers and pushes out the pallet on which an automobile engine component is placed. The 1st-axis inserts the hooking jig in the pallet and the 2nd-axis pushes it out. In...
EC – Transfer Device for Electronic Parts
A visual re-inspection process for rejected parts after a vision-camera inspection.Previously, this process was done manually all by hand (stretching hands to take the part, performing a visual inspection and returning the part). Depending on the workers' physical...
EC – Transfer Device of Ashtrays
A device for moving ashtrays horizontally and transferring them to the next process.This device transfers workpieces (ashtrays) to the next process. A motorized ELECYLINDER® was adopted because it was not possible to install a compressor at the site. One of the...
EC – Inspection Device of Bearing Torque
A device for inspecting bearing torqueWith the air cylinder, the speed and acceleration / deceleration were unstable, and there was a defect where the bearing was damaged by the impact of the holding jig. The ELECYLINDER® provides smooth deceleration, exerts no impact...
EC – Transfer Device for Stacked Frozen Food Packs
A device for stacking and transferring frozen food packs to the conveyor of the next process.This device transfers frozen gyoza dumplings from the wrapping process to the next process of packing into cardboard boxes. Packs are dropped from the conveyor by free fall,...
EC – Assembling Device of Automobile Interior Parts
A process to assemble parts on a resin-made frame.The "push function" of the ELECYLINDER® has enabled air-less and sensor-less operations. As the push motion is applied on an assembled part, the ELECYLINDER® detects the torque and outputs a "push motion complete"...