Machinery & Tools
05. Automotive connector inspection equipment – Alternative to Vertical Articulated Robot
Diagonal approaches and tip swiveling, possible until now only with vertically articulated robots, can now be performed at a low cost. The wrist unit is capable of interpolating motion with the orthogonal axes.
06. Automatic assembly machine with indexing system (press fitting of bushings) – R-Unit
R-unit controllers can be used with a mix of 24V/200V motors. A single unit can connect up to 16 axes, reducing price and installation space.
07. Orthogonal 3-axis NutRunner screw tightening equipment, Built-in linear guide sliders
IAI’s slider type incorporates a ball circulating type with a built-in linear guide, making it suitable for applications with large rotational reaction forces and moment loads. (NutRunner/Nut Runner)
EC – Inspection Device of Bearing Torque
A device for inspecting bearing torqueWith the air cylinder, the speed and acceleration / deceleration were unstable, and there was a defect where the bearing was damaged by the impact of the holding jig. The ELECYLINDER® provides smooth deceleration, exerts no impact...
Application Example: Device for applying glue to machine parts
Device for applying glue to machine parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4 MEC Controller Robo cylinders and MEC controllers have been adopted as devices that apply adhesives with mechanical dispensers to mechanical parts. It is a semi-automatic...
Application Example: Device for press-fitting the washer
Device for press-fitting the washer [ Robot/Electric Actuators ] [ Controllers ] RCP2-RA4C ROBONET (DeviceNet capable) RCP2 - RA4C was adopted in the process of press - fitting the washer to the machine parts. We selected ROBONET, which corresponds to DeviceNet for...
Application Example: Device for transporting crankshaft
Device for transporting crankshaft [ Robot/Electric Actuators ] [ Controllers ] ICSA2-G2JH-I-120AQ-80AQ-T1 XSEL 2-Axis controller The two axis orthogonal robot ICSA 2 was adopted as a device that picks up the workpiece (crankshaft) piled up separately and carries it...
Application Example: Deburring device for resin parts
Deburring device for resin parts [ Robot/Electric Actuators ] [ Controllers ] ICSA2-YAH XSEL RCP2-GR PCON Previously, workers performed the deburring process of molded parts of resin, but it was automated since there were problems such as taking too much workload by...
Application Example: Dryer for mechanical parts
Dryer for mechanical parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4C PCON It is a device to dry parts manufactured by machine tools. Previously, a worker dried the workpieces while holding the work and moving it back and forth under the nozzle that blows...
EC – Dispensing of Adhesive Agent
A system to dispense adhesive agent on wind-power generator parts. In the past, it was done manually, making uneven dispensing. The ELECYLINDER® performs even dispensing. In addition, because the starting and ending positions can easily be changed, it can exibly cope...
Easy Automation Concept Vol.10-2 Video #20
Example Video #20: System for soak-degreasing metal parts - Air cylinder vs IAI's ROBO Cylinder Shorter degreasing time achieved by flexible operation settings with the ROBO Cylinder This is a degreasing process for metal parts before they are plated. The...
Easy Automation Concept Vol.10 Videos
Example Video #19: System for inspecting/transferring stud bolt material - Air cylinder vs IAI's ROBO Cylinder A simple system configuration to reduce the cycle time by 44%. Material, round bars, are checked for outer diameter before a process of rolling machine....