Latest IAI News Page

EC – Transfer Device for Battery Containers

A device for transferring containers filled with battery liquid.This device transfers battery containers under the dispenser and returns them to their original positions after filling. Thanks to the operations with a preset acceleration/deceleration, a stable transfer...

EC – Device for Changing Parts Posture

An air cylinder used to make the parts fall out due to sudden turning. The ELECYLINDER® provides smooth accelerations/decelerations.

EC – Lifting Device of Semi-Finished Products for inspection

A device for lifting semi-finished products during assembling to perform a visual inspection of wiring on the bottom.Lifting up is required because the semi-finished product during assembling cannot be slanted for a visual inspection on the bottom. The ELECYLINDER®...

EC – Door Opening for High-Voltage Inspection Device

A device for opening the door of a voltage inspection device for automobile electronic parts.From the designing stage, the inspection device was presupposed to employ an ELECYLINDER®. The following effects were confirmed: 1) Opening: high speed operation. Closing:...

EC – Inspection Device for Substrate Continuity

A device for inspecting continuity of substrates by using a probe.In the past, an air cylinder was used. However, safety circuit designing for emergency stops (residual voltage, inadvertent leaping out, etc.) and restoring procedures after emergency stops were very...

EC – Operation of Positioning Pins of an Automated Guided Vehicle (AGV)

A device for lifting positioning pins of an automated guided vehicle (AGV).An air cylinder needs a compressor or air piping to be built-in the AGV. However, an ELECYLINDER® needs only simple wiring to operate the lifting device for positioning pins.EC-TW4L ...

EC – Loading for Press Machine

A device for loading metal plates onto a press machine In the past, in order to set the metal plate in the press and push it back, a worker put his hand in the press. Workability has been improved by electrifying the step of pushing into the back with ELECYLINDER®....

EC – Opening Device for Washing Apparatus Door

An opening Device for Washing Apparatus DoorThe air cylinder was previously used to open and close the door, but since the deceleration speed can not be controlled, the door makes hard contact when stopping at the rising and falling ends. Because of this, it was not...

Application Example: Device for applying glue to machine parts

Device for applying glue to machine parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4 MEC Controller Robo cylinders and MEC controllers have been adopted as devices that apply adhesives with mechanical dispensers to mechanical parts. It is a semi-automatic...