Conveyor & Warehouse – Electric Linear Actuator Application Examples
Application Example: EC – Device for transferring short cakes
System Overview : Improvement Overview : Device for transferring packaged short cakes to the next process conveyor belt.Replacing an air cylinder with an ELECYLINDER to transfer packaged short cakes.Reduced labor cost of $7,800 per year thanks to the shortened...
Application Example: EC – Printing device for cardboard boxes
Device for printing lot numbers on cardboard boxes for shipment. Replacing an air cylinder with an ELECYLINDER ®, IAI’s New Electric Actuator
EC – Transfer Device for Breads
A device for transferring breads on the tray transfer conveyor.When breads are fed out to the transfer conveyor before filling the tray, the transfer timing has to be adjusted by using a stopper. The ELECYLINDER® can easily adjust the starting/stopping positions and...
EC – Pallet Transfer Device
A transferring device for pallets on which automobile engine components are placed.This device transfers and pushes out the pallet on which an automobile engine component is placed. The 1st-axis inserts the hooking jig in the pallet and the 2nd-axis pushes it out. In...
EC – Transfer Device for Stacked Frozen Food Packs
A device for stacking and transferring frozen food packs to the conveyor of the next process.This device transfers frozen gyoza dumplings from the wrapping process to the next process of packing into cardboard boxes. Packs are dropped from the conveyor by free fall,...
EC – Panel Positioning Device
A device for adjusting the transfer position of panels which are flowing on the conveyor.The worker pushes the panel flowing on the conveyor against the stopper for positioning. Drilling is carried out in the next process. The stopper is used to change the stopping...
EC – Device for Changing Parts Posture
An air cylinder used to make the parts fall out due to sudden turning. The ELECYLINDER® provides smooth accelerations/decelerations.
EC – Operation of Positioning Pins of an Automated Guided Vehicle (AGV)
A device for lifting positioning pins of an automated guided vehicle (AGV).An air cylinder needs a compressor or air piping to be built-in the AGV. However, an ELECYLINDER® needs only simple wiring to operate the lifting device for positioning pins.EC-TW4L ...
Application Example: Device for transporting crankshaft
Device for transporting crankshaft [ Robot/Electric Actuators ] [ Controllers ] ICSA2-G2JH-I-120AQ-80AQ-T1 XSEL 2-Axis controller The two axis orthogonal robot ICSA 2 was adopted as a device that picks up the workpiece (crankshaft) piled up separately and carries it...