Conveyor & Warehouse – Electric Linear Actuator Application Examples
EC – Transfer System for Boxing Cosmetic Bottle
Mechanism for pushing boxes onto the next conveyor connected perpendicularly to the current conveyor An air cylinder was used to transfer packages containing cosmetic bottles between conveyors (connect-ed perpendicularly). However, sometimes the packages fell down due...
EC – Device for Removing Defective Electronic Parts
A device to remove defective electronic parts from the conveyor The movement of the ELECYLINDER® after the sensor's detection of a defective part and a forward-ON signal is faster than that of an air cylinder, enabling the conveyor to increase the speed. EC-S6H ...
EC – Transfer Device for Transportation Equipment Parts
A device to push out parts on a conveyor to transfer to another conveyor. Because there was no air source, the transfer work was done manually. However, an ELECYLINDER® has made automation possible. Setting of acceleration/deceleration is possible, preventing damages...
EC – Positioning Device for Glass Substrates
Adjusting the distance between guide plates of a transfer device according to two sizes of glass substrates. This device is to adjust the distance between two guide plates according to the size of the glass substrates in order to regulate the transfer position in a...
EC – Centering Device for Beverage Paper Packs
A device for centering beverage paper packs on a conveyor. Previously, air cylinders were used to align beverage paper packs in the center. Air pressure adjustments (to prevent the packs from being smashed) after a periodical maintenance was difficult. The employment...
EC – Sorting Device for Instant Soup Packages
A device to inspect instant soup packages (visual examination), and sort them into two locations. In the past, air cylinders were used at the sorting gates to move the gates vertically. Quality products were sometimes flicked off the conveyor due to a shock at the...
EC – Aligning Device for Lunch Boxes on a Conveyor
A device to align lunch boxes on the conveyor before a packaging machine. The ELECYLINDER® rod type pushes on the guide plate the lunch boxes that are flowing on the conveyor, and aligns them before going into a packaging machine. Previously an air cylinder was used,...
EC – Sorting Device for Food Products
A device to sort a single line of food products on a conveyor into two lines. Because the application was a movement between 2 points, a simple and low-cost ELECYLINDER® was employed. EC-R6 » more details
EC – Sorting Device for Cosmetics on the Conveyor
A device for swaying a conveyor to sort cosmetic products into two lines for inspection machines. Two inspection machines are installed to enhance the inspection capacity. An ELECYLINDER® is used to sway a conveyor to divide the cosmetic products into two lines for...