Factory airless.
Environmentally friendly.

ROBO Pump®

Equipment can be entirely electric with ROBO Pump®

Compact and Easy

palm size robo pump Maximize your workspace with this ultra-compact vacuum pump. Despite its small size, it has an integrated solenoid valve and pressure sensor, perfect for efficiently handling lightweight objects.

No Piping Necessary

pump to power source Forget complex setups with messy air lines or bulky compressors. Simply connect ROBO pump to the cable and power and you're ready to go. Add the optional wireless feature for remote communication with a teaching tool.

Monitor and Control with Ease

The built-in display shows real-time pressure and any alarm conditions. Intuitive four-way switches with a center push button allow for quick adjustments to threshold values and other parameters.

robopump display panel

Model Number

Power & Communication Cable length

1	1m
to	to
10	10m

^{(Note) When using the interface box, 9m is the maximum available.}

Power · I/O Cable length

0	No Cable. Terminal block connector is included when "ACR" is not selected *
1 to 9	1m to 9m standard cable included
S1 to S9	1m to 9m 4-way connector cable included

^{* When selecting RCON-EC connection specification (ACR), select "0". Power · I/O connector is not included.

(S): 4-way connector cable

(Note) Make sure that the total length along with the actuator cable is 10m or less.}

Options

Blank	NPN specification (Connected via I/F box) No option
ACR	RCON-EC connection specification *1
PN	PNP specification (Connected via I/F box) *1
WL	Wireless communication specification (Connected via I/F box) *2

^{*1 "PN" cannot be selected when "ACR" is selected. (I/O for "ACR" option is NPN only)

*2 "WL" cannot be selected when "ACR" is selected. (When using wireless communication, an interface box and cable must be purchased separately.)}

Power & Communication Cable

Cable code	Cable length
1 to 3	1 to 3m
4 to 5	4 to 5m
6 to 10	6 to 10m

^{(Note) Robot cable.}

Power・I/O Cable

Standard connector cable
Cable code	Cable length	User Wiring Type Flying leads CB-EC-PWBIO□□□-RB enclosed
0	No Cable	* The only accessory provided is the terminal block.
1 to 3	1 to 3m	✓
4 to 5	4 to 5m	✓
6 to 9	6 to 9m	✓

4-way connector cable
Cable code	Cable length	User Wiring Type Flying leads CB-EC-PWBIO□□□-RB enclosed
S1 to S3	1 to 3m	✓
S4 to S5	4 to 5m	✓
S6 to S9	6 to 9m	✓

^{(Note) Robot cable.}

Options

Name	Option code
RCON-EC connection specification	ACR
PNP specification	PN
Wireless communication specification	WL

Brackets (sold separately)

Name	Model
Side Attachment Bracket	RP-BKT-VPM
Cable Support Bracket	RP-FST-VPM

^{* For the external dimensions and mounting methods, refer to the instruction manuals.}

Specification
Item	Contents
Withdrawal Method	Vent to atmosphere
Pump Type	Diaphragm Pump System
Power supply voltage	24VDC±10%
Power supply current	Rated 0.8A maximum 1.3A
Vacuum pressure	-50kPa or less
Generated flow volume	1.8L/min or more
Air suction fitting size	For Φ 4x2.5mm tube
Installation orientation	Horizontal
Ambient operating temperature	0 to 40°C
Ambient operating humidity	85% RH or less (no condensation)
Allowable Duty Cycle	100% Duty cycle operation available * Duty (%) =Vacuum Time / (Vacuum Time + Stop Time)
Protection rating	IP20
Mass	320g

Reference for Loadable Workpiece Mass
Suction Cup Diameter (mm)	Top suction payload (kgf) (Safety Margin 4)	Side suction payload (kgf) (Safety Margin 8)
1	0.001	0.0005
3	0.009	0.0045
6	0.036	0.018
10	0.1	0.05
15	0.225	0.113
20	0.401	0.2