West 800-736-1712 | Central 800-944-0333 | East 678-354-9470
Select Page

ELECYLINDER® – Applications & Solutions

EC – Rivetting Device

EC – Rivetting Device

A device in an assembling process to staking-fasten a main unit and a cover by nylon rivet. Previously nylon rivet was inserted manually by using a hand press in the assembling process, causing occasional inconstant insertions, either too strong or too weak. By...

read more
EC – Dispensing of Adhesive Agent on Mechanical Parts

EC – Dispensing of Adhesive Agent on Mechanical Parts

A device to dispense adhesive agent on mechanical parts by using a dispenser. It is a semi-automatic device to move the dispenser from side to side by operating a switch. In the past, an air cylinder was used. Due to speed fluctuations caused by air pressure changes,...

read more
EC – Device for Inserting Metal Parts into Plastic Bases

EC – Device for Inserting Metal Parts into Plastic Bases

This device inserts a metal part into a plastic base frame in an electronic part assembling process. When inserting a metal part, it is necessary to slow down for the last 1mm. For this reason, a spring was used at the tip of an air cylinder for the insertion process....

read more
EC – Inspection Device for Glass Substrates

EC – Inspection Device for Glass Substrates

A device to perform a sampling inspection of glass substrates. This device performs a sampling inspection for glass substrates. The ELECYLINDER® transfers the glass substrate, while the cameras perform an inspection from the top and bottom simultaneously. The customer...

read more
EC – Positioning Device for Glass Substrates

EC – Positioning Device for Glass Substrates

Adjusting the distance between guide plates of a transfer device according to two sizes of glass substrates. This device is to adjust the distance between two guide plates according to the size of the glass substrates in order to regulate the transfer position in a...

read more
EC – Molding Process for Electric Appliance Parts

EC – Molding Process for Electric Appliance Parts

A device to press copper shafts of electric appliance parts onto a die for bending. In the past, an air cylinder was used for the bending process. After changing to an ELECYLINDER®, a slow operation and stable pressing pressure have become possible, generating no...

read more
EC – Flattening Device for Chocolate Surface

EC – Flattening Device for Chocolate Surface

A device for flattening chocolate surface after filled into a die. When flattening chocolate, an air cylinder transferred its vibration to the flattening bar at the time of stoppage. It made waves on the chocolate surface, but adjustments were difficult. By employing...

read more
EC – Centering Device for Beverage Paper Packs

EC – Centering Device for Beverage Paper Packs

A device for centering beverage paper packs on a conveyor. Previously, air cylinders were used to align beverage paper packs in the center. Air pressure adjustments (to prevent the packs from being smashed) after a periodical maintenance was difficult. The employment...

read more
EC – Sorting Device for Instant Soup Packages

EC – Sorting Device for Instant Soup Packages

A device to inspect instant soup packages (visual examination), and sort them into two locations. In the past, air cylinders were used at the sorting gates to move the gates vertically. Quality products were sometimes flicked off the conveyor due to a shock at the...

read more
EC – Mixing Device of Sauce into Food Ingredient

EC – Mixing Device of Sauce into Food Ingredient

A device to evenly mix sauce dispensed from a nozzle into an ingredient container. An ELECYLINDER® has been employed to add sauce into ingredient for mixing them evenly by waving the nozzle from side to side. It enables sauce to mix evenly and quickly. EC-S6  ...

read more
EC – Aligning Device for Lunch Boxes on a Conveyor

EC – Aligning Device for Lunch Boxes on a Conveyor

A device to align lunch boxes on the conveyor before a packaging machine. The ELECYLINDER® rod type pushes on the guide plate the lunch boxes that are flowing on the conveyor, and aligns them before going into a packaging machine. Previously an air cylinder was used,...

read more
EC – Sorting Device for Food Products

EC – Sorting Device for Food Products

A device to sort a single line of food products on a conveyor into two lines. Because the application was a movement between 2 points, a simple and low-cost ELECYLINDER® was employed. EC-R6     » more details

read more