West 800-736-1712 | Central 800-944-0333 | East 888-354-9470

Latest IAI News

EC – Device for Removing Defective Electronic Parts

Device for Removing Defective Electronic Parts A device to remove defective electronic parts from the conveyor The movement of the ELECYLINDER® after the sensor's detection of a defective part and a forward-ON signal is faster than that of an air cylinder, enabling...

read more

EC – Inspection Device for Automobile Safety Sensors

Inspection Device for Automobile Safety Sensors An inspection device to check the normal condition of automobile safety sensors after a shielding plate is closed. The employment of an ELECYLINDER® enables A (acceleration), V (velocity) and D (deceleration) to be...

read more

EC – Gripper of a Transfer Device for Mechanical Parts

Gripper of a Transfer Device for Mechanical Parts Used as a gripper of a transfer device to unload parts from processing equipment. In the past, an air cylinder was used, but electrification has been implemented with ELECYLINDER® in order to remove air pipings. EC-R6...

read more

EC – Welding Device for Auto Parts

Welding Device for Auto Parts A mechanism in a welding device for steel pipes to move the welding torch at a constant speed. In the past, this work was done manually, causing uneven quality. By using an ELECYLINDER®, the moving speed became constant, providing stable...

read more

EC – Rivetting Device

Rivetting Device A device in an assembling process to staking-fasten a main unit and a cover by nylon rivet. Previously nylon rivet was inserted manually by using a hand press in the assembling process, causing occasional inconstant insertions, either too strong or...

read more

EC – Dispensing of Adhesive Agent on Mechanical Parts

Dispensing of Adhesive Agent on Mechanical Parts A device to dispense adhesive agent on mechanical parts by using a dispenser. It is a semi-automatic device to move the dispenser from side to side by operating a switch. In the past, an air cylinder was used. Due to...

read more

EC – Device for Inserting Metal Parts into Plastic Bases

Device for Inserting Metal Parts into Plastic Bases This device inserts a metal part into a plastic base frame in an electronic part assembling process. When inserting a metal part, it is necessary to slow down for the last 1mm. For this reason, a spring was used at...

read more

EC – Inspection Device for Glass Substrates

Inspection Device for Glass Substrates A device to perform a sampling inspection of glass substrates. This device performs a sampling inspection for glass substrates. The ELECYLINDER® transfers the glass substrate, while the cameras perform an inspection from the top...

read more

EC – Positioning Device for Glass Substrates

Positioning Device for Glass Substrates Adjusting the distance between guide plates of a transfer device according to two sizes of glass substrates. This device is to adjust the distance between two guide plates according to the size of the glass substrates in order...

read more