West 800-736-1712 | Central 800-944-0333 | East 888-354-9470

Machinery & Tools

EC – Inspection Device of Bearing Torque

EC – Inspection Device of Bearing Torque

A device for inspecting bearing torqueWith the air cylinder, the speed and acceleration / deceleration were unstable, and there was a defect where the bearing was damaged by the impact of the holding jig. The ELECYLINDER® provides smooth deceleration, exerts no impact...

read more
Application Example: Device for press-fitting the washer

Application Example: Device for press-fitting the washer

Device for press-fitting the washer [ Robot/Electric Actuators ] [ Controllers ] RCP2-RA4C ROBONET (DeviceNet capable) RCP2 - RA4C was adopted in the process of press - fitting the washer to the machine parts. We selected ROBONET, which corresponds to DeviceNet for...

read more
Application Example: Device for transporting crankshaft

Application Example: Device for transporting crankshaft

Device for transporting crankshaft [ Robot/Electric Actuators ] [ Controllers ] ICSA2-G2JH-I-120AQ-80AQ-T1 XSEL 2-Axis controller The two axis orthogonal robot ICSA 2 was adopted as a device that picks up the workpiece (crankshaft) piled up separately and carries it...

read more
Application Example: Deburring device for resin parts

Application Example: Deburring device for resin parts

Deburring device for resin parts [ Robot/Electric Actuators ] [ Controllers ] ICSA2-YAH XSEL RCP2-GR PCON Previously, workers performed the deburring process of molded parts of resin, but it was automated since there were problems such as taking too much workload by...

read more
Application Example: Dryer for mechanical parts

Application Example: Dryer for mechanical parts

Dryer for mechanical parts [ Robot/Electric Actuators ] [ Controllers ] RCP3-SA4C PCON It is a device to dry parts manufactured by machine tools. Previously, a worker dried the workpieces while holding the work and moving it back and forth under the nozzle that blows...

read more
EC – Dispensing of Adhesive Agent

EC – Dispensing of Adhesive Agent

A system to dispense adhesive agent on wind-power generator parts. In the past, it was done manually, making uneven dispensing. The ELECYLINDER® performs even dispensing. In addition, because the starting and ending positions can easily be changed, it can exibly cope...

read more
Easy Automation Concept Vol.10-2 Video #20

Easy Automation Concept Vol.10-2 Video #20

Example Video #20: System for soak-degreasing metal parts - Air cylinder vs IAI's ROBO Cylinder   Shorter degreasing time achieved by flexible operation settings with the ROBO Cylinder This is a degreasing process for metal parts before they are plated. The...

read more
Easy Automation Concept Vol.10 Videos

Easy Automation Concept Vol.10 Videos

Example Video #19: System for inspecting/transferring stud bolt material - Air cylinder vs IAI's ROBO Cylinder A simple system configuration to reduce the cycle time by 44%. Material, round bars, are checked for outer diameter before a process of rolling machine....

read more
Easy Automation Improvement Example Vol 6-2

Easy Automation Improvement Example Vol 6-2

Easy Automation Improvement Example V.6-2 Machine Door Opening/Closing Mechanism This system creates tapped holes in aluminum die-cast boxes and finishes (mills) the holes. A vertical articulated robot is used to put in / take out parts to/from the processing machine....

read more
Easy Automation Concept Vol.4 Videos

Easy Automation Concept Vol.4 Videos

Example Video #07: Deburring System - Air cylinder vs IAI's ROBO Cylinder This system removes burrs around holes drilled in a pulley*1. Eight locations are deburred. The deburring brush attached to the motorized spindle*2 is used to remove the burrs along the edge of...

read more
Spot Welding Equipment Application Example

Spot Welding Equipment Application Example

* Exchange Rate: 1 (USD) = 100 (Japanese Yen) Automotive / Machine Tools Spot Welding Equipment Application Example Here you can create the content that will be used within the module. Robot: RCP4-SA7C, RCP2-SS8C Controller: PCON-CA Background This process carries a...

read more