Advancing into a NEW ERA switching Air to Electric Actuators
EC ELECYLINDER®
New Additions to the Series
Simple Operation without Programming
You can quickly setup ELECYLINDER® just by entering data. You can also operate it with ON / OFF signals, like a solenoid valve.
No time-consuming programming is necessary.
Easily Register the Start and End Points at Any Position
Easily Adjust AVD Settings Individually
Enter the movement conditions.
Easily Repairable in the Event of a Breakdown
Troubleshooting can be performed using the teaching pendant.
Device stoppage causes and countermeasures are displayed.
In nearly all cases, just replace the motor or controller circuit board yourself and the unit will recover.
Easily Reduce Cycle Time
Air cylinders cannot operate at high velocity due to the impact at stroke ends which occurs when excess velocity is applied.
The ELECYLINDER® can start and stop smoothly at high velocity, reducing cycle time.
Reduces Electricity Bills
The difference in the rate of power consumption for the ELECYLINDER® and air cylinders depends on the operational frequency. The higher the operational frequency, the more effective the energy-saving becomes.
Based on tests conducted by IAI, the ELECYLINDER®'s power consumption under the following conditions is 1/6 that of air cylinders.
New ELECYLINDER® Introduction and a New Rotary Type Catalog
Download an easy to follow introduction to the full line-up of ELECYLINDER®. New Rotary type EC has been added to the ELECYLINDER® series.
New IAI ELECYLINDER® Model PDFs – EC-ST15, EC-B6 and B7
ELECYLINDER® Series: EC Belt Driven type EC-B6 and B7, and Stopper Cylinder EC-ST15. Please download the catalog PDF.