Moment Calculator for Single Axis Actuators

Moment calculations are automatically performed based on the work load mass, distance to the center of gravity, and acceleration/deceleration during operation.

Use this to check whether the selected model meets the specifications.

Click on the file name below to open it, or right-click to save it before use.

File format: Microsoft Excel Software
File name: Moment_Cal_Ver12232025_A.xlsx

NOTE: This software operates with Excel macros. Select "Enable" if a warning message appears.

If it has already been disabled , switch the macro setting to " Enable all macros ".

++ Use calculators as a guide only. Please contact us to confirm any final selections. ++

Other Software Files

DXF Import Tool Tutorial Video

The DXF import feature is a function of the IAI X-SEL software. The X-SEL software is compatible with XSEL, ASEL, PSEL, and SSEL controllers. The X-SEL software version 7.09 has the DXF import feature. Please watch the tutorial video to learn more. DXF - Data/Drawing...

ROBO Cylinder PC Software v7 with ASEP/PSEP/DSEP

ROBO Cylinder PC Software v7 with ASEP/PSEP/DSEP – Controller Discontinuation and Replacement Information.

Connecting IAI Products to Other Software

Connecting IAI products to machinery of other makes - Information concerning communications 1) ROBONET Modbus communication function block / Omron PLC (CS1/CJ1 Series) When connecting ROBONET controllers to an Omron PLC (CS1/CJ1 Series) you will need to download a...

IAI Software Version History

MEC PC Software Version History Download is available at the MEC PC Software page. Version Revision Date Compatible Models (○ : Supported) Revision Notes AMEC PMEC ERC3 (MEC mode) V2.01.01.00 Sept 2014 ○ ○ ○ Latest version.Maintenance information configuration...

ROBONET Modbus Communication

Tutorials for Motion Control Software

The topics listed are those which are currently covered by the Tutorials section. If you have questions regarding any of these topics or those not listed, please contact us with your suggestion. SelWin Software (Sel E/G, DS, Sel A/B controllers) COM Port Setup...