Connecting IAI products to machinery of other makes -
Information concerning communications
1) ROBONET Modbus communication function block / Omron PLC (CS1/CJ1 Series)
When connecting ROBONET controllers to an Omron PLC (CS1/CJ1 Series) you will need to download a function block to simplify communications. (Free)
Click here for download page
1) ROBO Cylinder (ACON-PCON-SCON) / Digital Touch-panel (GP3000)
2) XSEL, SSEL, ASEL, PSEL, TT / Digital Touch-panel (GP3000)
1) When connecting a ROBO Cylinder (ACON-PCON-SCON) to the digital touch-panel (GP3000) an operation/configuration software is required (Free)
Click here for download page
(This link will open a new page to Pro-Face)
2) IAI and ProFace has developed a communication driver for the XSEL controller. The software download is available at the web page below.
| Title: | IAI Corporation X-SEL Controller Driver |
| Version: | Ver. 1.10.00 |
| Applicable Software: | GP-Pro EX Ver. 1.10.000 or later Pro-Server EX Ver. 1.10.000 or later |
| Related Devices : | X-SEL Series / SSEL Series / ASEL Series / PSEL Series / TT Series |
| Related Units: | GP3000 Series IPC Series for WinGP (GP-Pro EX Ver. 2.00.000 or later) General PCs for WinGP (GP-Pro EX Ver. 2.10.000 or later) LT3000 Series |
| Download: | X-SEL Controller Driver (Click Here) |
* To download the file, you may have to register with their web site.
ROBONET Generic Serial Communication - Modbus Communication / Panasonic PLC (FP-X/FP-?)
Control software download for ROBONET controller and Panasonic PLC (FP-X/FP-? Series) (Free)
(1) When using generic serial communication to servo on ROBONET.
Panasonic Automation Controls Homepage
(2) When using generic serial communication to read the ROBONET status.
Panasonic Automation Controls Homepage
(3) When using Modbus communication to control ROBONET.
Panasonic Automation Controls Homepage
